View Full Version : I-no CV "hit on tha beat" (last beta)
ghost333
09-28-2008, 04:20 PM
ok i am back from work (still need to fix my stick but anyway).
i think there is gonna be one more version, the last and final or maybe this one is gona be the final ,dunno.
i took the sugestions and comments made for my video
and improved a lot of things
the only think that i couldnt improve are the note mix-ups on axel (i will need some hlp on this)
i think that the video looks smooth (seventeen here i come :P)
high quality link:
http://rapidshare.com/files/155131932/ino4.wmv.html ~updated
youtube link:http://www.youtube.com/watch?v=o3KTBsm0P-U
Wendy
10-04-2008, 10:46 PM
just one thing (about the video edition):
it's a bit strange the final. (rotate so slow the pic). if you like the effect, you can change the picture (example: a ino pic like this (http://www.wallpaperbase.com/wallpapers/cartoons/guiltygear/guilty_gear_1.jpg))
good song :yaaay:
reaVer
10-04-2008, 11:52 PM
Looks asif the framerate is wrong, check and make sure its actually running at 30fps. For mixups on Axl, just set the character on block and playback him in neutral and you'll get the proper effect.
koogy
10-05-2008, 01:15 AM
any time you start a mix-up with 2P, it's completely pointless. they can block it crouching or standing.
ghost333
10-05-2008, 06:30 AM
i know i will remake those :P
ghost333
10-18-2008, 08:53 AM
update
http://rapidshare.com/files/155131932/ino4.wmv.html
bucklemyshoe
10-18-2008, 10:05 PM
is it slow like that when you play? or does it just capture it slow?
ghost333
10-19-2008, 02:30 AM
my hdtv has some lag from ps2... i can feel it on frcs and ad canceling with millia
reaVer
10-19-2008, 02:36 AM
Its probable that your HDTV only supports 50Hz then, and if you record through your HDTV you will have issues. If possible try to hook up the ps2 directly to the recording device, and use the output of the recording device on your TV, or get a 60Hz TV:P Oh, and most recording devices are able to convert NTSC into PAL on your TV screen, you might get some timing issues, but it should be alright.
vashking
11-06-2008, 10:37 PM
ok i am back from work (still need to fix my stick but anyway).
i think there is gonna be one more version, the last and final or maybe this one is gona be the final ,dunno.
i took the sugestions and comments made for my video
and improved a lot of things
the only think that i couldnt improve are the note mix-ups on axel (i will need some hlp on this)
i think that the video looks smooth (seventeen here i come :P)
high quality link:
http://rapidshare.com/files/155131932/ino4.wmv.html ~updated
youtube link:
wooo, nice track
On testament, I see a nice combo and i have a question about the input...you do 6P VCL frc 5s HCL AD J.h UF...you jump installed that one right? cause I-no looked way too low to dash from that using a tk'd Hcl... so was the input 6p (8)9632146 S frc?
bucklemyshoe
11-13-2008, 04:04 AM
You can't jump install 6P because it's not a JC'able move. The input he probably used was 6P32147SFRC896S32147896K 6FRC6 23632H146S
BTW if you TK an HCL from c.S it doesn't combo but can be used for a nice tech trap/reset at the end of a long combo. (5K TK HCL works better though, since usually c.S is out of range)
TK HCL only combos on 5H and Far.S.
TK VCL can combo on 5H, c.S and maybe 5K (dunno, i'd have to test that out)
Otherwise you have to jump install.
You can only JI c.S, 5K, 5H. However tech falling into an instant attack will give you an automatic jump install and landing her 66 hoverdash into an instant attack will give you an automatic jump install. (this is why you see people often wiffing j.H)
You can't jump install 6P because it's not a JC'able move. The input he probably used was 6P32147SFRC896S32147896K 6FRC6 23632H146S )
I know you can't Jump install 6P i was wondering if he did it from c.S
and if you say that was the input he probably used then he did Jump install the Slash
ghost333
11-21-2008, 07:49 AM
on the s part
63214S96k
Powered by vBulletin™ Version 4.0.4 Copyright © 2010 vBulletin Solutions, Inc. All rights reserved.