Q&A about Joystick Building, Parts, and Purchasing

[nonnonnon]

do you know what one of the four pictures there match a round 2 te? I'm sure that's stupid but it looks like buttons are on the left side.

[KayEff]

There are no PCB diagrams of TEs on slagcoin. There are only diagrams of pad PCBs, meant for wiring a PCB by yourself.

[mr.mortified]

In that diagram, the TE is laid out in the very top. The buttons are on the left side as they are meant for looking at the joystick from the back, where you would end up seeing the 4 pin harness cable and therefore the buttons are on the left side and not the right side.

edit: that diagram is quite moot actually when it comes to the round 2 TE pcb as the directions and what signals they are are laid out plainly on the PCB itself

[mr.mortified]

madcatz sale for final round

15% off of TE's. Ends on the 18th

http://shoryuken.com/f177/mad-catz-f...2011-a-268286/

[deathVIAavatar]

Howdy fellow stickies. I'm currently working on a Joytron Paewang Revolution mod for use on my 360 and my friends ps3, and what I've done so far is taken it apart, sanded it, primed, and painted it (stupid krylon plastic paint takes a week to be chip damage free), and next is to grind out the button wholes to 30mm for my sanwa buttons, and put it all back together with the new stick and wiring. My question though, is if anyone can help me with the artwork for it? I have the right template, and I have artwork, but I'm just working on spicing it up a bit. All I really want to do to the artwork is add a bloody sword cut that passes at an angle through the buttons, but also leaves blood splatter-esque markes around the button labels. The artwork I'm using is the image of Asura from Samurai Shodown. http://www.bishibooru.com/_images/c0...wn%20sword.jpg but flipped horizontally. Any help at all, even a nudge in the right direction for more info, is hugely appreciated for my quest.

[mr.mortified]

the paewang eh?

good choice but if you're looking for art, try zepp museum or SRK's tech talk and asking someone to do it for you there. I'm not the most photoshop adept myself. If you were asking something about actual modding then i could help out there

[deathVIAavatar]

Oh no, so far I haven't run into any problems with the actual modding process, just trying to get help with the artwork and making it more snazzy. But if I do run into problems during the soldering process or the grinding process, I will definitely ask about that! Thanks for the heads though on where I might get help with my current issue though.

[SH-Junkie]

I have a question about building a stick. i have a super street fighter 4 tourny ed arcade stick. I wanna get artwork done and use clear see through buttons to show off the art work. Now what size are the buttons on the ssf4 tourny ed stick?

[Kurushii]

I have a question about building a stick. i have a super street fighter 4 tourny ed arcade stick. I wanna get artwork done and use clear see through buttons to show off the art work. Now what size are the buttons on the ssf4 tourny ed stick?

The buttons on the top are 30mm. The ones on the side are 24mm.

[SH-Junkie]

Thanks Kurushii