User:Wakeup720

Wakeup720/Data

Overview

Overview

Valkenhayn is a high mobility rushdown character. His Drive functions as a mode change change mechanic where he switches between his slow human form and his high speed wolf form. In wolf form, Valkenhayn has access to some of the strongest mixups in the game with his famous wolf brake j.A. This is complimented by his excellent corner carry.

In turn, Valkenhayn demands tight execution and good resource management. He also requires good fundamental defense and understanding of neutral. In human form, he lacks many defensive options, and his inability to block in wolf form forces him to rely on movement to escape situations. Valkenhayn rewards dedicated players with freeform movement and combo options.

File:Wakeup720 Wakeup720 Icon.png Wakeup720 is a high execution rushdown character with amazing mixup and corner carry.

Pros

Cons

• Wolf Offense: Valkenhayn's Wolf form gives him access to unreactable high/low mixups and looping pressure as long as he has the gauge to back him up.
• Wolf Neutral: Wolf form also provides incredible movement tools, allowing Valk to run circles around his opponents and approach on his terms.
• High Reward: Learning how to use Wolf form comes with the most oppressive corner pressure in the game, as well as many anti-reversal option selects.
• Corner Carry: Valk's incredible corner pressure is accentuated by his impressive ability to take opponents there off many stray hits.

• Shaky Defense: Valk has lower than average health and lacking defensive options. He also cannot block while in Wolf form, necessitating careful use.
• Resource Dependent: without Wolf meter, Valkenhayn has a hard time pressuring opponents and safely navigating neutral.
• High Execution: Valk needs every bit of damage he can get as his output is below average. He also needs anti-reversal option selects or pressure becomes very difficult.

Valkenhayn transforms into a wolf by pressing the D button. In wolf form, Valkenhayn gains a completely new moveset and movement properties and is generally a smaller target. However, Valkenhayn cannot block while in this form. Pressing the D button again or getting hit will revert back Valkenhayn back into human form. Despite its low profile, getting hit while in a wolf state is never considered to be a crouching hit.

If the gauge reaches 0, Valkenhayn will automatically transform back into a human and must wait for the gauge to completely refill before he is able to transform again. While in wolf form, the following decreases the Wolf Gauge:

• Moving backwards
• Using Geschwind Wolf or Rasen Wolf
• Using any of Valkenhayn's wolf form specials.
• Time spent airborne

The Wolf Gauge only regenerates while Valkenhayn is grounded in human form. If Valkenhayn has depleted the Wolf Gauge it will regenerate at any time. This means that Valkenhayn can jump in the air and still regenerate the gauge. It is important to conserve your wolf gauge for optimal pressure and look for very minimal methods of depleting meter whilst dealing damage.

Cannot be activated in wolf form. During Endless Wolf, the Wolf Gauge regenerates much faster. The wolf gauge constantly regenerates unless Valkenhayn is in the air in wolf form. Regeneration varies based on Valkenhayn's form. It regenerates at its fastest when Valkenhayn is grounded in human form. When fully depleted, the wolf gauge fully regenerates 3 times faster. Valkenhayn also gains the following buffs:

• w[j.214A/B/C] have drastically increased hitstun. They also cause hard knockdown.
• j.C cancels into Geschwind Wolf.
• Rasen wolf, Geschwind Wolf, w[236X] and w[j.214X] all have faster startup.

Fastest Ground Abare:This character's fastest attacks for mashing or scrambles. Excludes universal throws.	5A (6F whiffs crouchers) 2A (7F)
Reversal Attacks:Any reversal-esque moves this character has. Excludes universal options.	632146D (12F)
Fatal Starters:	6C 236B

Normal Moves

5A

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

5B

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

5C

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

2A

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

2B

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

2C

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

6A

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

6B

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

6C

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

3C

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

j.A

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

j.B

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

j.C

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Wolf Normals

5A

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

5B

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

5C

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

j.A

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

j.B

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

j.C

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

Drive Moves

5D/j.D

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

4D

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Geschwind Wolf

Cancel Human Attack with direction + D

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Back Throw

4B+C

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

Air Throw

j.B+C

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

Counter Assault

6A+B while Blocking

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Crush Trigger

5A+B (Chargeable)

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Specials

Nacht Jager

236A

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Schwarz Jagd

236B

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Weiss Jagd

236B after Schwarz Jagd

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Nacht Rosen

236C

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Mondlicht

j.214B

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

Konig Wolf

236A/B/C during Werewolf

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

Eisen Wolf

j.214A/B/C during Werewolf

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Himmel Wolf

B+C during Werewolf, air OK

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

Distortion Drives

Sturm Wolf

632146D while Human

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Konig Flug

j.236236C

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

Exceed Accel

Sieg Nagel

A+B+C+D during Overdrive

No results

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

No results

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Placeholder Description

Astral Heat

Blut Vollmond

214214C while Human

Damage	GuardHow this attack can be guarded. Throws have their throw range listed instead.	StartupHow many frames the attack needs to go through in order to reach its active frames. The listed startup frame coincides with the move's first active frame.	ActiveHow many frames where there is a hitbox that can hit an opponent. The first active frame occurs on the listed startup frame.	RecoveryHow many frames that the character must go through after an attack's active frames to automatically go back to a neutral stance, or the total duration of the move if it has no hitbox/creates projectiles.	Frame AdvHow many frames the attacker's recovery ends before the defender's blockstun ends if the attack is blocked. A positive value indicates that the attacker recovers first, while a negative value indicates that the defender recovers first. This value usually assumes that the attack's first active frame (of each hit, if multi-hit) is blocked.	On ODRThe difference between the attacker's total animation length and the period the opponent is in overdrive raid. This frame advantage is based off the assumption that both players input during the hitstop of a prior move, so that this attack and ODR start on the same frame.	AttributeSome attacks are invulnerable to attacks with specific attributes. This notes what attributes each attack possesses. H - Head B - Body F - Foot P - Projectile. Independent projectiles will have their Durability level listed, e.g. a projectile with Durability level 2 will show P2 T - Throw D - Doll attack, such as Carl's or Relius' doll Burst - Burst, which has its own unique attribute	Invuln

Starter RatingDetermines the starting value of the hitstun/untech decay timer and subsequent combo length	P1Proration applied to future hits when used as the first hit of a combo	P2Proration applied to future hits when used during any part of a combo	Attack LevelDefault Attack Level Values Level Blockstun Hitstun Ground CH Air CH Lv.0 9 10 (12 in air) +4 +15 Lv.1 11 12 +4 +16 Lv.2 13 14 +5 +16 Lv.3 16 17 +7 +19 Lv.4 18 19 +10 +20 Lv.5 20 21 +14 +22 Note: Not every attack uses default values

Colors

Color 1	Color 2	Color 3	Color 4	Color 5	Color 6
Color 7	Color 8	Color 9	Color 10	Color 11	Color 12
Color 13	Color 14	Color 15	Color 16	Color 17	Color 18
Color 19	Color 20	Color 21	Color 22	Color 23	Color 24

External References

• Beginner's Guide by Kiba. Written in CF1, but the vast majority still holds up.
• Japanese Name: ヴァルケンハイン＝R＝ヘルシング
• Japanese Wiki
• Japanese BBS
• Arcade Profile Dan Rankings
• Color Palettes on https://blazblue.wiki

Navigation

 Valkenhayn R. Hellsing

Wakeup720/Data

To edit frame data, edit values in Wakeup720/Data.

BlazBlue: Central Fiction

 Amane Nishiki ^[★]

 Arakune ^[★]

 Azrael ^[★]

 Bang Shishigami ^[★]

 Bullet ^[★]

 Carl Clover ^[★]

 Celica A. Mercury ^[★]

 Es ^[★]

 Hakumen ^[★]

 Hazama ^[★]

 Hibiki Kohaku ^[★]

 Iron Tager ^[★]

 Izanami ^[★]

 Izayoi ^[★]

 Jin Kisaragi ^[★]

 Jubei ^[★]

 Kagura Mutsuki ^[★]

 Kokonoe ^[★]

 Lambda-11 ^[★]

 Litchi Faye Ling ^[★]

 Mai Natsume ^[★]

 Makoto Nanaya ^[★]

 Mu-12^[★]

 Naoto Kurogane ^[★]

 Nine the Phantom ^[★]

 Noel Vermillion ^[★]

 Nu-13 ^[★]

 Platinum the Trinity ^[★]

 Rachel Alucard ^[★]

 Ragna the Bloodedge ^[★]

 Relius Clover ^[★]

 Susano'o ^[★]

 Taokaka ^[★]

 Tsubaki Yayoi^[★]

 Valkenhayn R. Hellsing ^[★]

 Yuuki Terumi ^[★]

Click [★] for character's full frame data

Essentials
• HUD • Controls • FAQ •
The Basics
• Movement/Canceling • Offense • Defense • Gauges • Universal Strategy •
Detailed & Advanced Information
• Damage/Combo • Attack Attributes • Frame Data & System Data • Misc •
Archived Information
• Patch Notes • Tier Lists •

• Active Flow
• Advanced Input
• Attack Attributes
• Attack Level
• Astral Heat
• Auto Heat Gain
• Burst
• Barrier Block
• Barrier Gauge
• Bonus Proration
• Clash
• Combo Rate
• Counter Assault
• Counter Hit
• Counter Hit Carry
• Crush Trigger
• Danger State
• Distortion Drive
• Exceed Accel
• Fatal Counter
• Guard Cancel Overdrive
• Guard Crush
• Guard Bonus
• Hard Knockdown
• Heat Gauge Cooldown
• Instant Barrier
• Instant Block
• Negative Penalty
• Overdrive
• Overdrive Cancel
• Purple Throw
• P1, P2
• Rapid Cancel
• Same Move Proration (SMP)
• Starter Rating
• Super Flash Buffer
• Throw Reject Miss (TRM)
• Ukemi/Tech (Air)
• Ukemi/Roll/Emergency Tech
• Untechable State